|
|
1，我们出投标保证金。
2，发产品目录及名片扫描件到邮箱 armstrongzhang@vip.qq.com.之后我把整体标书发到你邮箱。
3，
最后打电话给你，我们细谈下合作。
11KV GIS Panel
a) 11KV GIS panel (630A)for feeder(25 nos.)
b) 11KV GIS panel(1250A) for incoming from Transformer (6
nos.)
c) 11KV GIS panel (1250A)for Bus sectionalizer (3 nos.)
总数量34sets
The Tenderer shall submit with its Tender the following additional documents:
1. Sealed & signed original Tender Document (which was issued by BPDB) by a person duly authorized to sign on behalf of the tender. Copy of issued tender document will not be acceptable.
2. Registration /Certificate of Incorporation /Trade licence in its country of origin / relevant documents as documentary evidence to satisfy experience criteria as stated in ITT 14.1(a).
3. End User certificate (s) as documentary evidence to satisfy experience criteria as stated in ITT 14.1(b).
4. Updated brochures of the supplier and/or manufacturer as documentary evidence to satisfy experience criteria as stated in ITT 14.1(c)
5. Audited Financial reports or bank statement or credit line(s) substantiated by any schedule Bank as documentary evidence to satisfy financial criteria as stated in ITT 15.
6. Compliance certificate confirming to the terms and condition of the tender document.
7. Name of the Manufacturer, Certificate of the country of Origin and port of shipment (where applicable) of the offered equipment / items.
8. Warranty Certificate (Form PG4-12) from Tenderer as per GCC 33
9. List of Goods and Delivery schedule as stated in Schedule of Requirements, Section : 6.
10. Manufacturer’s Printed Catalogue describing specification and technical data of offered type equipment.
11. Outline and General Arrangement drawings of the offered type equipment as per existing System
12. Detail description of testing facilities at manufacturer’s plant including calibration certificates of testing equipment.
13. Manufacturer’s valid ISO 9001 Certificate.
14. Certification from the manufacturer confirming that his offered item is unused, new and in good condition and confirmed all features & accessories stated in Section 7: Technical Specification.
td_pg4_ otm_ final_gis.doc 32
15. No deviation has accepted as per existing system.
16. Guaranteed Technical Particulars (GTP) in Section 7, clause 7.10 shall be properly filled up in manufacturer’s official pad with submission of related supporting documents & signed by the Manufacturer & Tenderer.
17. At least 02 (two) nos. of Manufacturer’s Supply Experience (supported by Copy of NOA/ Contract Agreement/Certificate from Purchaser) for offered type similar or higher capacity rating 33KV GIS Panel & 11KV GIS Panel of same voltage class within the last 05 (five) years i.e. years counting backward from the date of publication of IFT in the news paper.
Manufacturer’s Supply Experience shall be furnished in the following supply record format. (The Supply Experience covering at least 25% of the
tendered quantity in a single contract will be considered only):-
Sl. Name, Address, Contract No. & Contract Description Date of
No. Phone & Fax No. Date/NOA Value of materials Completion of
of the with Supply
Purchaser Quantity
td_pg4_ otm_ final_gis.doc 33
18. At least 02 (two) nos. Manufacturer’s Satisfactory Performance
Certificates (supported by the Supply Record) from Electricity Utility as End User depicting that the offered type similar or higher capacity rating 33KV GIS Panel & 11KV GIS Panel of same voltage class has been supplied within last 10(ten) years i.e. years counting backward from the date of publication of IFT in the news paper and has been in satisfactorily service for at least 02(two) years. The Satisfactory Performance Certificate (SPC) shall be in End User’s official pad and shall contain end-user’s full mailing address, e-mail address, website address and fax / telephone number for the convenience of authentication.
Note: Electricity Utility means an organization/company that engages in electricity generation/ transmission / distribution of electricity for sale in a regulated market.
19. Manufacturer's authorization for Protective Relays from Siemens (Germany) or ABB (Switzerland/Finland/ Sweden) or Schneider(France/UK) or Alstom (France/UK) or NR (China), & Energy Meters from Siemens (Germany/Switzerland) or AEG (Germany) or ABB (Switzerland/Finland) or Itron (USA) or Elster (USA/Romania) or Landis+ Gyr ( Switzerland) or Toshiba (Japan) or Honeywell (USA) in prescribed Form (PG4-5).
20. Type Test Certificates & Reports for offered type similar or higher Ampere rating 33KV GIS Panel & 11KV GIS Panel for same voltage class from any short-circuit testing liaison (STL) Member [http://www.stl-liaison.org/web/03_Members.php] Testing Organization or Laboratory as per relevant IEC standard. The type test report along with results shall include at least the following tests :
a) Dielectric Test
b) Radio interference Voltage test
c) Measurement of resistance of the main circuit.
d) Temperature/ Gas pressure Rise Tests
e) Short-time withstand current and peak withstand current tests
f) Internal Arc Fault test
g) Mechanical operation tests.
Note : If required, Purchaser will authenticate Type Test Certificates & Reports from the Certificates & Reports issuing laboratory. The certificates and Reports shall contain laboratory’s full mailing address, e-mail address, website address and fax/telephone number for the convenience of authentication. If these information are not mentioned in the Certificates & Reports, all these information should be mentioned in the Letterhead pad of the manufacturer duly seal & signed by the manufacturer representative.
附件: 您所在的用户组无法下载或查看附件
|
|
发表于 2018-4-28 15:21:00
